LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (15 - Engine - Cylinder Head, Valve Control -- 92A Cayenne) >> WM 153319 Removing And Installing Timing-Case Cover (Cayenne S & Cayenne GTS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install chain tensioner. → 153519 REMOVING AND INSTALLING TIMING CHAINS ON V6 DFI ENGINES 
  2. Install oil guide housing. → 175019 REMOVING AND INSTALLING OIL GUIDE HOUSING
  3. Install oil pan. → 175019 REMOVING AND INSTALLING OIL PAN
  4. Install turbocharger. → 213019 REMOVING AND INSTALLING TURBOCHARGER
  5. Install joint flange on crankshaft sealing ring for pulley. → 137419 REMOVING AND INSTALLING CRANKSHAFT SEALING RING FOR PULLEY/VIBRATION BALANCER
  6. Install coolant hoses in front of the timing-case cover.
  7. Install drive belt. → 137819 REMOVING AND INSTALLING DRIVE BELT .
  8. Fill in engine oil.
  9. Install pulley. → 137619 REMOVING AND INSTALLING PULLEY (VIBRATION BALANCER)
  10. Install both valve covers. → 158219 REMOVING AND INSTALLING CYLINDER HEAD COVER 
  11. Install engine with transmission. → 100119 REMOVING AND INSTALLING ENGINE
scientia non olet · About LEMON Manuals