Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value
Fastening Screw For Camshaft Controller	Replace	Initial Tightening	80 Nm (59 ft. lb.)
Fastening Screw For Camshaft Controller		Final Tightening	+90°
Fastening Screw For Camshaft Sprocket	Replace	Initial tightening	80 Nm (59 ft. lb.)
Fastening Screw For Camshaft Sprocket		Final Tightening	+90°
Fastening Screw For Chain Tensioner		Tightening Torque	9 Nm (6.5 ft. lb.)
Fastening Screw Securing Bearing Plate For Drive Sprocket		Initial Tightening	8 Nm (6 ft. lb.)
Fastening Screw Securing Bearing Plate For Drive Sprocket		Final Tightening	+45°
Fastening Screw For Bearing Pin	Replace	Initial Tightening	5 Nm (3.5 ft. lb.)
Fastening Screw For Bearing Pin		Final Tightening	+60 Nm (+44 ft. lb.)
Fastening Screw For Camshaft Sprocket	Replace	Initial Tightening	80 Nm (59 ft. lb.)
Fastening Screw For Camshaft Sprocket		Final Tightening	+90°
Fastening Screw For Camshaft Controller	Replace	Initial Tightening	80 Nm (59 ft. lb.)
Fastening Screw For Camshaft Controller		Final Tightening	+90°
Fastening Screw For Bearing Pin	Replace	Initial Tightening	30 Nm (22 ft. lb.)
Fastening Screw For Bearing Pin		Final Tightening	+90°
Fastening Screw For Chain Tensioner		Tightening Torque	9 Nm (6.5 ft. lb.)
Fastening Screw On Camshaft Clamp		Tightening Torque	25 Nm (19 ft. lb.)
Locking Pin T40069		Tightening Torque	25 Nm (19 ft. lb.)
Locking Pin T40069		Tightening Torque	25 Nm (19 ft. lb.)
Fastening Screw On Camshaft Clamp		Tightening Torque	25 Nm (19 ft. lb.)