LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (38 Automatic Transmission Gears Control -- 92A Cayenne) >> WM 387719 Removing And Installing ELECTROHYDRAULIC Control Unit (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne Tip, Cayenne (3.0)) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Screws on electrohydraulic control unit   Initial tightening 8 Nm (6 ftlb.)    
Screws on electrohydraulic control unit   Torque angle 90°    
Transmission fluid temperature sensor   Tightening torque 10 Nm (7.5 ftlb.)    
scientia non olet · About LEMON Manuals