LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (38 Automatic Transmission Gears Control -- 92A Cayenne) >> WM 386219 Removing And Installing Line For ATF Cooling (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne (3.0)) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Holder for ATF line to rear of engine   Tightening torque 10 Nm (7.5 ftlb.)    
Holder for ATF lines to front of engine   Tightening torque 10 Nm (7.5 ftlb.)    
ATF lines to thermostat   Tightening torque 8 Nm (6 ftlb.)    
Holder for ATF lines to front of transmission   Tightening torque 23 Nm (17 ftlb.)    
ATF lines to ATF heat exchanger   Tightening torque 8 Nm (6 ftlb.)    
Holder for ATF line to rear of engine   Tightening torque 10 Nm (7.5 ftlb.)    
Holder for ATF lines to front of engine   Tightening torque 10 Nm (7.5 ftlb.)    
ATF lines to thermostat   Tightening torque 8 Nm (6 ftlb.)    
ATF lines to transmission   Tightening torque 20 Nm (15 ftlb.)    
Heat shield for automatic transmission   Tightening torque 15 Nm (11 ftlb.)    
ATF lines to ATF heat exchanger   Tightening torque 8 Nm (6 ftlb.)    
ATF lines to transmission   Tightening torque 20 Nm (15 ftlb.)    
Heat shield for automatic transmission   Tightening torque 15 Nm (11 ftlb.)