LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (26 - Exhaust System -- 92A Cayenne) >> WM 266919 Removing And Installing Combination Valves For Secondary Air [Cayenne S E-Hybrid & Cayenne (3.0)] >> Installing Combination Valves For Secondary Air >> Installing Left Combination Valve For Secondary Air

Installing Left Combination Valve For Secondary Air

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

For tightening torques, tightening sequence and assembly overview, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1. Replace seal.
    2. 1.2. First screw in secondary air pipe, then tighten combination valve.
scientia non olet · About LEMON Manuals