LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (97 - Cables -- 92A Cayenne) >> WM 971519 Removing And Installing Front Wire Harness >> Installing Front Wire Harness

Installing Front Wire Harness

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
    1. 1.1. Make sure that the individual sub-parts of the front wire harness are not twisted or entangled.
    2. 1.2. Check that the wire harness is routed correctly and without tension so that no chafing occurs.
    3. 1.3. Connect all electric plug connections until they engage securely.
    4. 1.4. Lock all electric plug connections by hand using the manual slide lock.
    5. 1.5. Clip in all sub-parts of the front wire harness securely at the relevant positions.
scientia non olet · About LEMON Manuals