LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (55 - Lids, Flaps -- 92A Cayenne) >> WM 556819 Removing And Installing Control Unit For Rear Lid (Cayenne Tip, Cayenne Man, Cayenne S, Cayenne Turbo, Cayenne GTS, Cayenne S Hybrid, Cayenne Turbo S, Cayenne Diesel, Cayenne S Diesel, Cayenne Tip (3.0)) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the control unit was replaced, the control unit must be adapted to the vehicle using the 2nd generation PIWIS Tester 9818  . → 556855 REPLACING CONTROL UNIT FOR REAR LID .
  2. Install lower part of rear trim panel. → 709219 REMOVING AND INSTALLING TRIM PANEL FOR TAILGATE