LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (55 - Lids, Flaps -- 92A Cayenne) >> WM 555719 Removing And Installing Release For Rear Lid (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Release For Rear Lid

Removing Release For Rear Lid

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Voltage peaks
  • Risk of damage to load or to the control unit

→ Switch off ignition and remove remote control before disconnecting or removing load.

  1. Screw off fastening nuts -1-  for release for rear lid -A-  .
    Fig 1: Removing Release For Rear Lid
    G09939293Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unplug electric plug connection -B-  .
  3. Press rear lid release at the pins -1-  outwards -A-  .

    Removing rear lid release