LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (55 - Lids, Flaps -- 92A Cayenne) >> WM 555719 Removing And Installing Rear Lid Release (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Rear Lid Release

Removing Rear Lid Release

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Voltage peaks
  • Risk of damage to load or to the control unit

→ Switch off ignition and remove remote control before disconnecting or removing load.

  1. Release electric plug connections and disconnect connectors.
  2. Unscrew fastening nuts -1-  on the rear cover plate.
    1. 2.1. Unclip cover plate from the catch -2-  and remove it.
      Fig 1: Removing Cover Plate
      G09939291Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Press rear lid release -1-  outwards at the bolts -2-  .
    Fig 2: Pressing Rear Lid Release
    G09939292Courtesy of PORSCHE CARS NORTH AMERICA, INC.