LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (55 - Lids, Flaps -- 92A Cayenne) >> WM 555719 Removing And Installing Rear Lid Release (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing Rear Lid Release

Installing Rear Lid Release

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. The rear lid release is installed in reverse order to removal.
  2. Tighten the fastening nuts for the rear lid release to Tightening torque 6 Nm (4.5 ftlb.)  .
scientia non olet · About LEMON Manuals