LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (55 - Lids, Flaps -- 92A Cayenne) >> WM 553119 Removing And Installing Front Pneumatic Spring (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Function Test On Pneumatic Spring

Function Test On Pneumatic Spring

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close and open the lid several times to check that the pneumatic springs are working properly and were fitted correctly.
  2. Open the lid fully. The two fitted pneumatic springs must hold the lid open.
  3. Close the lid.
scientia non olet · About LEMON Manuals