LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (55 - Lids, Flaps -- 92A Cayenne) >> WM 552519 Removing And Installing Front Lid Hinge (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front lid. → 552219 REMOVING AND INSTALLING FRONT LID 
  2. Tighten rear profile seal for front lid on both sides. → 553319 REMOVING AND INSTALLING SEAL FOR FRONT LID 
  3. Remove both cover flaps of the cowl panel cover. → 664419 REMOVING AND INSTALLING COWL PANEL COVER
scientia non olet · About LEMON Manuals