Installing Front Lid Release

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

Check rubber sleeves for damage and replace if necessary.
Re-insert removed rubber sleeves.

The front lid release is installed in reverse order to removal.

Tighten fastening screws on lower part of lid lock to Tightening torque 12 Nm (9 ftlb.) +/-1 Nm (+/- 0.5 ftlb.) .