LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne) >> WM 408519 Removing And Installing Front Spring Strut (Steel Springs) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preliminary Work >> Removing And Installing Front Spring Strut (Steel Springs)

Removing And Installing Front Spring Strut (Steel Springs)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the relevant side engine compartment trim. → 700219 REMOVING AND INSTALLING FRONT COVER (ENGINE COMPARTMENT)
  2. Before raising the vehicle, loosen the drive shaft mounting at the wheel side. Operate the brake while doing so (a second mechanic is required). → 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT 
  3. Remove the drive shaft. → 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT 
scientia non olet · About LEMON Manuals