LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne) >> WM 408519 Removing And Installing Front Spring Strut (Steel Springs) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preliminary Work >> Preliminary Work For Removing And Installing Front Spring Strut (Steel Springs) On Driver's Side

Preliminary Work For Removing And Installing Front Spring Strut (Steel Springs) On Driver's Side

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Vehicles with PDCC:

    Loosen PDCC reservoir at the fastening nut and set it aside. → 430955 REPLACING RESERVOIR (PDCC)

  2. Loosen and remove holder for PDCC reservoir at the threaded joints -1, 2-  at the left of the engine compartment.
    Fig 1: Identifying Holder For PDCC Reservoir - Cable Guide
    G09935250Courtesy of PORSCHE CARS NORTH AMERICA, INC.