LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne) >> WM 402055 Replacing Trailing-Arm Bearings (Cayenne GTS) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Service brake (footbrake) with grey cast iron brake discs (standard brake) with PSM (Porsche Stability Management) as standard Hydraulic dual-circuit brake system with brake-circuit division per axle. Vacuum brake booster, internally ventilated brake discs with six-piston aluminum monobloc fixed-calliper brake on front axle and four-piston aluminum monobloc fixed-calliper brake on rear axle.        
PSM Porsche Stability Management (PSM) as standard with the functions Anti-lock Brake System (ABS), Anti-Slip Regulation (ASR), Engine Drag Torque Control (EDTC), Automatic Brake Differential (ABD), brake force boosting, brake system pre-filling.      


Location Description Type Basic value Tolerance 1 Tolerance 2
Service brake (footbrake) with grey cast iron brake discs (standard brake) with PSM (Porsche Stability Management) as standard Hydraulic dual-circuit brake system with brake-circuit division per axle. Vacuum brake booster, internally ventilated brake discs with six-piston aluminum monobloc fixed-calliper brake on front axle and four-piston aluminum monobloc fixed-calliper brake on rear axle.        
PSM Porsche Stability Management (PSM) as standard with the functions Anti-lock Brake System (ABS), Anti-Slip Regulation (ASR), Engine Drag Torque Control (EDTC), Automatic Brake Differential (ABD), brake force boosting, brake system pre-filling.