LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (3X - Power Transmission - General -- 92A Cayenne) >> WM 3X00IN Tightening Torque, Tightening Sequence And Assembly Overview (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne (3.0)) >> Technical Values >> Transfer Gear - Assembly Overview

Transfer Gear - Assembly Overview

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Shaft Sealing Rings On Transfer Gear Component
G09934285Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Circlip/replace 
  2. O-ring/replace 
  3. Dust boot/replace 
  4. Sealing ring, rear output drive
  5. Transfer gear
  6. Ventilation cap
  7. Sealing ring, inner drive
  8. Circlip/replace 
  9. O-ring/replace 
  10. Dust boot/replace 
  11. Sealing ring, front output drive
  1. -1-  - Oil filler screw → Tightening torque: 20 Nm (15 ftlb.) 
  2. -2-  - Oil drain plug → Tightening torque: 20 Nm (15 ftlb.) 
    Fig 2: Identifying Oil Filler Screw And Drain Plug
    G09934286Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals