LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (92 - Windshield Wiper And Washer System -- 92A Cayenne) >> WM 921219 Removing And Installing Rain Sensor (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Rain Sensor

Removing Rain Sensor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Voltage peaks
  • Risk of damage to electrical load or to the control unit
Fig 1: Identifying Rain Sensor Installation Position
G09941865Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Switch off ignition and remove remote control (hand-held transmitter).
  2. Using a plastic wedge, carefully detach the rain sensor -1-  out of the adhesive plate -2-  .
    Fig 2: Removing Rain Sensor
    G09941866Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Disconnect electric plug connection -1-  .
    Fig 3: Disconnecting Plug Connection
    G09941867Courtesy of PORSCHE CARS NORTH AMERICA, INC.