Installing Evaporator

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

Make sure not to damage the foam seal on the evaporator during installation .
The seal on the evaporator cannot be replaced separately. It must only be replaced together with the evaporator .
Check that the evaporator is fitted correctly in the heating/fresh-air unit .

Installation is performed in reverse order.
When installing the upper part of the housing, make sure that the three guide pins on the lower part of the housing are inserted into the openings on the upper part of the housing.