LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (87 Air Conditioning -- 92A Cayenne) >> WM 872019 Removing And Installing Servo Motor For Defroster (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Teaching Servo Motor

Teaching Servo Motor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The servo motors only need to be taught if a servo motor is replaced.

  1. PIWIS Tester II 9818  must be connected. Then teach the servo motors.
    1. 1.1. Select vehicle.
    2. 1.2. Select "Air conditioning" control unit.
    3. 1.3. Select "Maintenance and repairs".
    4. 1.4. Select and start "Teach: LIN automatic addressing".
    5. 1.5. Select and start "Alignment drive for LIN servo motors".
    6. 1.6. Shut down and disconnect PIWIS Tester II.
scientia non olet · About LEMON Manuals