LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (87 Air Conditioning -- 92A Cayenne) >> WM 870317 Adding Refrigerant And Removing By Suction (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: High voltage at the high-voltage system on hybrid vehicles
  • Danger of electric shock from live parts
  • Risk of serious burns or death
  • Health risks for persons with medical devices/life-support systems.

→ Before working on the high-voltage electrical system and carrying out any repair work to the body, a high-voltage technician must switch off the power to the system.

→ All work on vehicles with a high-voltage electrical system may only be carried out by electrically instructed persons. The work must be done under the instruction of a high-voltage technician.

→ Observe general warning notes for working on the high-voltage electrical system. → 2X00IN GENERAL WARNING NOTES FOR WORKING ON THE HIGH-VOLTAGE ELECTRICAL SYSTEM

  1. Install front cover (engine compartment). → 700219 REMOVING AND INSTALLING FRONT COVER (ENGINE COMPARTMENT)
  2. Connect high-voltage system to power supply → 2X00IN ISOLATION FROM SUPPLY PRIOR TO PERFORMING MAINTENANCE TASKS ON HYBRID VEHICLES → 2X00IN ISOLATING HIGH-VOLTAGE ELECTRICAL SYSTEM FROM POWER SUPPLY/STARTING HIGH-VOLTAGE ELECTRICAL SYSTEM