LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (27 - Starter, Power Supply, Cruise Control -- 92A Cayenne) >> WM 279619 Removing And Installing Charging Socket (Cayenne S E-Hybrid) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Plug in electric plug connection at the high-voltage charger until it engages securely. → 279719 REMOVING AND INSTALLING ON-BOARD CHARGER 
  2. Plug in high-voltage connectors for PTC at the front, high-voltage battery and high-voltage charger until they engage securely. → 279719 REMOVING AND INSTALLING ON-BOARD CHARGER 
  3. Install side trim panel for rear luggage compartment at the left. → REMOVING SIDE TRIM PANEL FOR REAR LUGGAGE COMPARTMENT - section on "Removing"
  4. Install luggage compartment cover. → 700619 REMOVING AND INSTALLING TRIM PANEL FOR LUGGAGE COMPARTMENT (LUGGAGE COMPARTMENT COVER)
  5. Start the high-voltage system and complete the relevant documentation. → 2X00IN ISOLATING HIGH-VOLTAGE ELECTRICAL SYSTEM FROM POWER SUPPLY/STARTING HIGH-VOLTAGE ELECTRICAL SYSTEM (AFES)
scientia non olet · About LEMON Manuals