LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (27 - Starter, Power Supply, Cruise Control -- 92A Cayenne) >> WM 279519 Removing And Installing Pilot Line Connector (Cayenne S Hybrid) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Read out the fault memory using PIWIS Tester II 9818  . If faults are present in the high-voltage system, correct them according to the fault-finding strategy.
  2. Create the test log under Standard forms in the PPN "Restarting high-voltage system"  and place it in the vehicle documents folder.
  3. Close front and rear lid.
  4. Proceed according to the current specifications in "Guided Fault Finding" and in the latest Technical Information releases for special tasks to be performed after servicing and repairing the Cayenne Hybrid.
scientia non olet · About LEMON Manuals