LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (27 - Starter, Power Supply, Cruise Control -- 92A Cayenne) >> WM 279419 Removing And Installing Control Unit For HV Battery (Cayenne S Hybrid) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the high-voltage battery. → INSTALLING HIGH-VOLTAGE BATTERY  - section on "Installing".
  2. Start the high-voltage system and complete the relevant documentation. → 2X00IN ISOLATING HIGH-VOLTAGE ELECTRICAL SYSTEM FROM POWER SUPPLY/STARTING HIGH-VOLTAGE ELECTRICAL SYSTEM .
  3. If the control unit was replaced, the control unit must be adapted to the vehicle using PIWIS Tester II 9818  . → 279455 REPLACING BATTERY MANAGEMENT SYSTEM CONTROL UNIT .
  4. If the fault memory was erased, the electric motor must be calibrated fully.
scientia non olet · About LEMON Manuals