LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (27 - Starter, Power Supply, Cruise Control -- 92A Cayenne) >> WM 278515 Adjusting Control Unit For Distance Measuring Sensor (All Models) >> Preliminary Work >> Notes

Preliminary Work: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

The distance measuring sensor must be re-adjusted as part of the following tasks 

  1. Suspension was aligned and adjusted.
  2. The distance measuring sensor (ACC sensor) control unit and/or the control unit holder was removed, replaced and re-installed.
  3. The lock carrier was loosened.
  4. The front end is damaged.
  5. Fault memory entry: ACC sensor incorrectly adjusted (D00004).
    1. 5.1. The misalignment angle is outside of the range -1.5° to +1.5°.