LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (27 - Starter, Power Supply, Cruise Control -- 92A Cayenne) >> WM 270519 Removing And Installing Battery Sensor (All Models) >> Installing Battery Sensor

Installing Battery Sensor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

After replacing the battery sensor, the battery sensor will be detected automatically by the gateway control unit.

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening nut securing ground line to the body. Tightening Torque 20 Nm (15 ft. lb.) 
  3. Tighten terminal clamp on ground line. Tightening Torque 6 Nm (4.5 ft. lb.)
  4. Check that the rubber sleeve is seated correctly in the opening of the battery box.
scientia non olet · About LEMON Manuals