LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (10 - Engine - Crankcase, Suspension -- 92A Cayenne) >> WM 103719 Removing And Installing Torque Support (Cayenne GTS, Cayenne S Hybrid) >> Installing Torque Support

Installing Torque Support

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install torque support.
    1. 1.1. Use new screws and nuts.
    2. 1.2. Place torque support in installation position.
    3. 1.3. Insert screws and screw on the nuts.
    4. 1.4. Tighten screws to Initial tightening 20 Nm (15 ftlb.) Final tightening 180°  and counter at the nuts.
scientia non olet · About LEMON Manuals