LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (10 - Engine - Crankcase, Suspension -- 92A Cayenne) >> WM 1001IN Tightening Torques, Tightening Sequences, Assembly Overviews (Cayenne S E-Hybrid) >> Technical Values >> Notes

Technical Values: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Aluminum screw, M6 AL9 Initial tightening 4 Nm (3 ftlb.)    
Aluminum screw, M6 AL9 Final tightening 90°    
Aluminum screw, M8 AL9 Initial tightening 10 Nm (7.5 ftlb.)    
Aluminum screw, M8 AL9 Final tightening 90°    
Aluminum screw, M10 AL9 Initial tightening 20 Nm (15 ftlb.)    
Aluminum screw, M10 AL9 Final tightening 90°    
Fastening screws for engine carrier Replace Initial tightening 120 Nm (89 ftlb.)    
Fastening screws for engine carrier   Final tightening +180°    
Fastening screw securing engine mounting to engine carrier   Tightening torque 60 Nm (44 ftlb.)    
Fastening screw securing right engine support to engine   Tightening torque 40 Nm (30 ftlb.)    
Fastening screw securing right engine support to engine   Initial tightening 50 Nm (37 ftlb.)    
Fastening screw securing right engine support to engine   Final tightening +90°    
Fastening nut securing engine support to engine mounting   Tightening torque 75 Nm (56 ftlb.)    
Fastening screw securing left engine support to engine   Tightening torque 40 Nm (30 ftlb.)    
Fastening screw securing left engine support to engine   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw securing engine mounting to engine carrier   Tightening torque 60 Nm (44 ftlb.)    
Fastening screw securing electric drive motor to engine   Tightening torque 65 Nm (48 ftlb.)    
Fastening screw securing electric drive motor to engine   Tightening torque 45 Nm (33 ftlb.)    
Fastening screw securing electric drive motor to engine Replace Initial tightening 20 Nm (15 ftlb.)    
Fastening screws securing electric drive motor to engine   Final tightening +90°    
Fastening screw securing electric drive motor to engine   Tightening torque 65 Nm (48 ftlb.)    
Fastening screw securing electric drive motor to engine   Tightening torque 65 Nm (48 ftlb.)    
Fastening screw securing electric drive motor and transmission Replace Initial tightening 30 Nm (22 ftlb.)    
Fastening screw securing electric drive motor to transmission   Final tightening 90°    
Connecting rod bolts Oil thread and contact surface Initial tightening 50 Nm (37 ftlb.)    
Connecting rod bolts Oil thread and contact surface Final tightening +90°    
Fastening screw for oil spray jet   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for joint flange on pulley side Tighten in diagonally opposite sequence Tightening torque 9 Nm (6.5 ftlb.)    
Screw plug for TDC marking on crankshaft   Tightening torque 14 Nm (10.5 ftlb.)    
Deflection roller for poly-V-belt   Tightening torque 42 Nm (31 ftlb.)    
Vibration damper to crankcase Replace Initial tightening 20 Nm (15 ftlb.)    
Vibration damper to crankcase   Final tightening 90°    
Tensioner for poly-V-belt to crankcase   Tightening torque 40 Nm (30 ftlb.)    
Fastening screw for vibration damper Replace Initial tightening 20 Nm (15 ftlb.)    
Fastening screw for vibration damper   Final tightening +90°    
Fastening screw for joint flange on pulley side Tighten in diagonally opposite sequence and in steps Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing poly-V-belt pulley for coolant pump to coolant pump   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw for coolant pump   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw on tensioning element for poly-V-belt pulley   Tightening torque 40 Nm (30 ftlb.)    
Fastening screw for vibration damper Replace Initial tightening 20 Nm (15 ftlb.)    
Fastening screw for vibration damper   Final tightening +90°    
Fastening screw securing generator to engine   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw securing deflection roller for poly-V-belt   Tightening torque 40 Nm (30 ftlb.)    
Fastening screw for joint flange on pulley side   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing poly-V-belt pulley for coolant pump to coolant pump   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw for coolant pump   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw on tensioner for poly-V-belt   Tightening torque 40 Nm (30 ftlb.)    
Fastening nut securing cable shoe to generator   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw for drive plate Replace Initial tightening 60 Nm (44 ftlb.)    
Fastening screw for drive plate   Final tightening +90°    
Fastening screw for drive plate Replace Initial tightening 60 Nm (44 ftlb.)    
Fastening screw for drive plate   Final tightening +90°    
Fastening screw securing balance weight on transmission side   Tightening torque 60 Nm (44 ftlb.)    
Fastening screw for end plate   Tightening torque 13 Nm (9.5 ftlb.)    
Fastening screw securing balance weight on pulley side   Tightening torque 60 Nm (44 ftlb.)    
Fastening nut   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for camshaft controller Replace Initial tightening 80 Nm (59 ftlb.)    
Fastening screw for camshaft controller   Final tightening +90°    
Fastening screw for camshaft sprocket Replace Initial tightening 80 Nm (59 ftlb.)    
Fastening screw for camshaft sprocket   Final tightening +90°    
Fastening screw for chain tensioner   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing bearing plate for drive sprocket   Initial tightening 8 Nm (6 ftlb.)    
Fastening screw securing bearing plate for drive sprocket   Final tightening +45°    
Fastening screw for bearing pin Replace Initial tightening 5 Nm (3.5 ftlb.)    
Fastening screw for bearing pin   Final tightening +60 Nm (+44 ftlb.)    
Fastening screw for camshaft sprocket Replace Initial tightening 80 Nm (59 ftlb.)    
Fastening screw for camshaft sprocket   Final tightening +90°    
Fastening screw for camshaft controller Replace Initial tightening 80 Nm (59 ftlb.)    
Fastening screw for camshaft controller   Final tightening +90°    
Fastening screw for bearing pin Replace Initial tightening 30 Nm (22 ftlb.)    
Fastening screw for bearing pin   Final tightening +90°    
Fastening screw for chain tensioner   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for guide rail Replace Initial tightening 10 Nm (7.5 ftlb.)    
Fastening screw for guide rail   Final tightening +90°    
Fastening screw for bearing pin Replace Initial tightening 5 Nm (3.5 ftlb.)    
Fastening screw for bearing pin   Final tightening +60 Nm (+44 ftlb.)    
Fastening screw for guide rail Replace Initial tightening 10 Nm (7.5 ftlb.)    
Fastening screw for guide rail   Final tightening +90°    
Fastening screw for guide rail Replace Initial tightening 10 Nm (7.5 ftlb.)    
Fastening screw for guide rail   Final tightening +90°    
Fastening screw securing bearing plate for drive sprocket   Initial tightening 8 Nm (6 ftlb.)    
Fastening screw securing bearing plate for drive sprocket   Final tightening +45°    
Fastening screw for bearing pin Replace Initial tightening 30 Nm (22 ftlb.)    
Fastening screw for bearing pin   Final tightening +90°    
Fastening screw for chain tensioner   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for guide rail Replace Initial tightening 10 Nm (7.5 ftlb.)    
Fastening screw for guide rail   Final tightening +90°    
Fastening screw securing drive sprocket for oil pump Replace Initial tightening 30 Nm (22 ftlb.)    
Fastening screw securing drive sprocket for oil pump   Final tightening +90°    
Fastening screw securing sprocket for balance shaft Replace Initial tightening 15 Nm (11 ftlb.)    
Fastening screw securing sprocket for balance shaft   Final tightening +90°    
Fastening screw for chain tensioner Replace Initial tightening 10 Nm (7.5 ftlb.)    
Fastening screw for chain tensioner   Final tightening +45°    
Fastening screw on hall sender   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for cylinder head Replace Initial tightening 40 Nm (30 ftlb.)    
Fastening screw on cylinder head   Tightening torque +90°    
Fastening screw on cylinder head   Final tightening +90°    
Fastening screw on cylinder head cover   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw on connector strip   Tightening torque 5 Nm (3.5 ftlb.)    
Fastening screw for camshaft control Replace Tightening torque 5 Nm (3.5 ftlb.)    
Fastening screws securing chain box to cylinder head Replace aluminum screws with steel screws Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for cylinder head   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for cylinder head   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing guide frame for camshafts Replace Initial tightening 8 Nm (6 ftlb.)    
Fastening screw for guide frame for camshafts   Final tightening +90°    
Fastening nut for oil level and oil temperature sensor   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for baffle plate   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw Fit with securing liquid Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for engine oil cooler Replace Initial tightening 3 Nm (2 ftlb.)    
Fastening screw for engine oil cooler   Final tightening +90°    
Fastening screw for engine oil cooler (bottom)   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for mounting saddle   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for sprocket Replace Initial tightening 30 Nm (22 ftlb.)    
Fastening screw for sprocket   Final tightening +90°    
Fastening screw for oil pump   Tightening torque 20 Nm (15 ftlb.)    
Oil drain plug   Tightening torque 30 Nm (22 ftlb.)    
Fastening screw on oil-filter housing   Tightening torque 13 Nm    
Oil pressure switch   Tightening torque 20 Nm    
Fastening nut on oil-filter housing On double screw Tightening torque 13 Nm (9.5 ftlb.)    
Fastening screw on oil-filter housing   Tightening torque 9 Nm (6.5 ftlb.)    
Lid on oil-filter housing   Tightening torque 35 Nm    
Double screw securing oil-filter housing   Tightening torque 16 Nm    
Oil pressure switch for reduced oil pressure   Tightening torque 20 Nm    
Oil non-return valve   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw on cover of oil separator   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw on cover of oil separator   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for positive crankcase ventilation pipes   Tightening torque 3 Nm (2 ftlb.)    
Oil non-return valve   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw for front left coolant pipes   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for front left coolant pipes   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for front left coolant pipes   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing holder for front left coolant pipes to engine   Tightening torque 22 Nm (16 ftlb.)    
Fastening screw for front coolant pipe   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for front coolant pipe   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing lower coolant pipe to compressor   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing lower coolant pipe to compressor   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing upper coolant pipe to compressor   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing upper coolant pipe to compressor   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for upper coolant pipe   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for front coolant pipe   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for engine oil cooler pipes   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for engine oil cooler pipes   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing coolant pipe to transmission   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing coolant pipe to transmission   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing coolant pipe to transmission   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing coolant pipe to transmission   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing coolant pipe to transmission   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for coolant pump   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing poly-V-belt pulley for coolant pump to coolant pump   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw for adapter   Initial tightening 8 Nm (6 ftlb.)    
Fastening screw for adapter Torque angle Torque angle 90°    
Deflection roller for poly-V-belt   Tightening torque 42 Nm (31 ftlb.)    
Fastening screw for coolant regulator   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screws for radiator   Tightening torque 25 Nm (19 ftlb.)    
Fastening screw for top radiator mounting   Tightening torque 5 Nm (3.5 ftlb.)    
Fastening screw for coolant pump   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing poly-V-belt pulley for coolant pump to coolant pump   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw for adapter   Initial tightening 8 Nm (6 ftlb.)    
Fastening screw for adapter Torque angle Torque angle 90°    
Deflection roller for poly-V-belt   Tightening torque 42 Nm (31 ftlb.)    
Fastening screw for coolant regulator   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw on engine suspension eyelet   Tightening torque 27 Nm (20 ftlb.)    
Fastening screw on insulation plate   Tightening torque 5 Nm (3.5 ftlb.)    
Fastening screw on throttle valve control unit   Tightening torque 10 Nm (7.5 ftlb.)    
Fastening screw for connection piece   Tightening torque 10 Nm (7.5 ftlb.)    
Fastening screw on holder   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw on regulating valve control unit   Tightening torque 10 Nm (7.5 ftlb.)    
Fastening screw for intake air temperature sensor Replace Tightening torque 10 Nm (7.5 ftlb.)    
Fastening nut on compressor   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw for boost pressure sensor Replace Tightening torque 10 Nm (7.5 ftlb.)    
Fastening screw securing charge-air cooler to compressor housing Self-locking Tightening torque 10 Nm (7.5 ftlb.)    
Fastening screw securing charge-air cooler to compressor housing Self-locking Tightening torque 10 Nm (7.5 ftlb.)    
Fastening screw for drive head Self-locking/replace Tightening torque 25 Nm (19 ftlb.)    
Fastening screw on lower part of air cleaner   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing potentiometer to intake manifold flap   Tightening torque 2.5 Nm (2 ftlb.)    
Fuel pressure sensor Oil thread Tightening torque 22 Nm (16 ftlb.)    
Fastening screw for high-pressure line holder   Tightening torque 9 Nm (6.5 ftlb.)    
Union nut for fuel high-pressure lines   Tightening torque 27 Nm (20 ftlb.)    
Fastening screw securing fuel high-pressure line to holder   Tightening torque 9 Nm    
Fastening nut   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing retaining bar for fuel distributor   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw   Tightening torque 2.5 Nm (2 ftlb.)    
Union nut for fuel distributor   Tightening torque 40 Nm (30 ftlb.)    
Fastening screw securing high-pressure pump to housing   Tightening torque 9 Nm (6.5 ftlb.)    
Adapter   Tightening torque 27 Nm (20 ftlb.)    
Adapter   Tightening torque 27 Nm (20 ftlb.)    
Union nut securing fuel high-pressure line to high-pressure pump   Tightening torque 25 Nm (19 ftlb.)    
Fuel pressure sensor for low pressure   Tightening torque 15 Nm (11 ftlb.)    
Fastening nut for fuel supply line holder   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw on hall sender   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for high-pressure pump housing   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening nut on protective plate   Tightening torque 9 Nm (6.5 ftlb.)    
Oxygen sensor   Tightening torque 55 Nm (41 ftlb.)    
Oxygen sensor   Tightening torque 55 Nm (41 ftlb.)    
Fastening screws on combination valve   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screws on secondary air pipe   Tightening torque 5 Nm (3.5 ftlb.)    
Fastening nut on holder for secondary air pump motor   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening nut on exhaust manifold Replace and grease with hot screw paste Tightening torque 25 Nm (19 ftlb.)    
Fastening screw for heat shield   Tightening torque 10 Nm (7.5 ftlb.)    
Fastening nut securing front exhaust pipe to exhaust manifold Replace and grease with hot screw paste Tightening torque 23 Nm (17 ftlb.)    
Fastening nut securing catalytic converter to front silencer Replace Tightening torque 23 Nm (17 ftlb.)    
Fastening nut securing catalytic converter to exhaust manifold Replace and grease with hot screw paste Tightening torque 23 Nm (17 ftlb.)    
Fastening screw on support for left catalytic converter   Tightening torque 23 Nm (17 ftlb.)    
Fastening nut securing catalytic converter to exhaust manifold Replace and grease with hot screw paste Tightening torque 23 Nm (17 ftlb.)    
Fastening nut securing catalytic converter to front silencer Replace Tightening torque 23 Nm (17 ftlb.)    
Fastening screw on support for right catalytic converter   Tightening torque 23 Nm (17 ftlb.)    
Fastening screw on support for right front silencer   Tightening torque 23 Nm (17 ftlb.)    
Fastening screw on support for left front silencer   Tightening torque 23 Nm (17 ftlb.)    
Fastening nut on clamping sleeve   Tightening torque 35 Nm (26 ftlb.)    
Fastening nut on clamping sleeve   Tightening torque 35 Nm (26 ftlb.)    
Fastening screw securing catalytic converter holder to transmission, left   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing catalytic converter holder to transmission, left   Tightening torque 23 Nm (17 ftlb.)    
Fastening screw securing catalytic converter holder to transmission, right   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw securing catalytic converter holder to transmission, right   Tightening torque 23 Nm (17 ftlb.)    
Fastening screw for suspension   Tightening torque 23 Nm (17 ftlb.)    
Fastening screw for suspension   Tightening torque 23 Nm (17 ftlb.)    
Fastening nut on clamping sleeve   Tightening torque 35 Nm (26 ftlb.)    
Fastening nut on clamping sleeve   Tightening torque 35 Nm (26 ftlb.)    
Fastening screw for suspension   Tightening torque 23 Nm (17 ftlb.)    
Tailpipe   Tightening torque 30 Nm (22 ftlb.)    
Tailpipe   Tightening torque 30 Nm (22 ftlb.)    
Fastening screw securing adapter for starter to transmission   Tightening torque 10 Nm (7.5 ftlb.)    
Fastening screw (M10 x 95) for starter   Initial tightening 15 Nm (11 ftlb.)    
Fastening screw (M10 x 95) for starter   Final tightening +105° +/-30°  
Fastening screw (M12 x 75) for starter   Initial tightening 30 Nm (22 ftlb.)    
Fastening screw (M12 x 75) for starter   Final tightening +105° +/-30°  
Fastening screw for generator   Tightening torque 20 Nm (15 ftlb.)    
Fastening nut securing electric line to generator   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw on hall sender   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for knock sensor   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw for camshaft control valve   Tightening torque 5 Nm (3.5 ftlb.)    
Spark plug   Tightening torque 30 Nm (22 ftlb.)    
Fastening screw for electric wire harness   Tightening torque 5 Nm (3.5 ftlb.)    
Fastening screw for engine speed sender   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw on hall sender 2   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for air-conditioning compressor   Tightening torque 20 Nm (15 ftlb.)    
Fastening screw for refrigerant line   Tightening torque 23 Nm (17 ftlb.)    
scientia non olet · About LEMON Manuals