Technical Values: Overview

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value
Installation Dimension For Torque Converter	Cayenne 3.0 V6 Diesel	Control Value	18.9 mm
Installation Dimension For Torque Converter	Cayenne 3.0 V6 (China)	Control Value	20.2 mm
Installation Dimension For Torque Converter	Cayenne 3.6 V6	Control Value	22.1 mm
Minimum Installation Dimension For Torque Converter	Cayenne 4.8 S/GTS/Turbo - Check That It Is Seated Correctly And Prevent It From Tilting	Control Value (Minimum Dimension)	4.5 mm
Installation Dimension For Torque Converter	Cayenne 3.0 S Hybrid	Control Value	18.9 mm
Installation Dimension For Torque Converter	Cayenne 4.2 S Diesel	Control Value	23.0 mm
Transmission To Engine	M12 x 60	Tightening Torque	80 Nm (59 ft. lb.)
Transmission To Engine	M12 x 140 + M12 nut	Tightening Torque	80 Nm (59 ft. lb.)
Transmission To Engine	M12 x 140	Tightening Torque	80 Nm (59 ft. lb.)
Transmission To Engine	M10 x 50	Tightening Torque	45 Nm (33 ft. lb.)
Transmission To Engine	M12 x 70	Tightening Torque	80 Nm (59 ft. lb.)
Transmission To Engine	M12 x 60	Tightening Torque	80 Nm (59 ft. lb.)
Torque Converter	Drive Plate To Converter	Tightening Torque	85 Nm (63 ft. lb.)
Coolant Pipes	To Converter Bell Housing	Tightening Torque	9 Nm (6.5 ft. lb.)
ATF Line	To Transmission	Tightening Torque	25 Nm (19 ft. lb.)
ATF Line	Holder To Converter Bell Housing	Tightening Torque	10 Nm (7.5 ft. lb.)
Heat Shield	To Right Side Of Transmission	Tightening Torque	10 Nm (7.5 ft. lb.)
Heat Shield	To All-Wheel Final Drive	Tightening Torque	10 Nm (7.5 ft. lb.)
ATF Inspection Plug	In ATF Pan	Tightening Torque	70 Nm (52 ft. lb.)