LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (37 Automatic Transmission - Actuation, Housing -- 92A Cayenne) >> WM 370819 Removing And Installing Selector Support (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust selector lever cable.

    → 371515 ADJUSTING SELECTOR LEVER CABLE 

  2. Install switch console.

    → 962719 REMOVING AND INSTALLING SWITCH CONSOLE

  3. Install selector knob.

    → 370419 REMOVING AND INSTALLING SELECTOR KNOB 

  4. Install center console cover at the top and bottom.

    → 681919 REMOVING AND INSTALLING CENTRE CONSOLE COVER

  5. Install PCM 3.1 display and operator control unit.

    → 911019 REMOVING AND INSTALLING PCM 3.1 DISPLAY AND OPERATOR CONTROL UNIT

  6. Install center air vents at the left and right.

    → 855319 REMOVING AND INSTALLING CENTRE AIR VENT

scientia non olet · About LEMON Manuals