LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (39 - Final Drive - Differential, Differential Lock -- 92A Cayenne) >> WM 398819 Removing And Installing All-Wheel Final Drive (All Models) >> Subsequent Work For All-Wheel Final Drive

Subsequent Work For All-Wheel Final Drive

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front cardan shaft → INSTALLING FRONT CARDAN SHAFT  - section on "Installing".
  2. Remove engine support. → 1001IN SUPPORTING ENGINE ON THE BODY
  3. Mount front wheels. → INSTALLING WHEEL - section on "Installing"
  4. Calibrate steering angle sensor → 456005 INITIALIZING AND CALIBRATING STEERING ANGLE SENSOR
  5. Perform suspension alignment and adjust the vehicle if necessary. → 449503 SUSPENSION ALIGNMENT, COMPLETE
  6. Install engine guard → INSTALLING ENGINE GUARD - section on "Installing".
scientia non olet · About LEMON Manuals