LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (24 - Fuel System - Electronic Ignition -- 92A Cayenne) >> WM 245819 Removing And Installing Fuel Pressure Regulator (Cayenne Turbo & Cayenne Turbo S) >> Removing Pressure Regulator

Removing Pressure Regulator

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Left And Right Connection Unit
G09933665Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Right connection unit with pressure regulator
  2. Left connection unit with fuel filter
  1. Disconnect all connections apart from the fuel line -3-  on the underside of the right connection unit.
  2. The fuel line -3-  cannot be disconnected from the pressure regulator (right connection unit).
    Fig 2: Identifying Fuel Line On Pressure Regulator
    G09933666Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Disconnect the fuel line -3-  from the left connection unit.
    Fig 3: Identifying Fuel Line On Left Connection Unit
    G09933667Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Attach a piece of wire or similar item to the fuel line in order to pull the line back through the fuel tank during installation.
  5. Remove the right connection unit (with pressure regulator) completely.