LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (24 - Fuel System - Electronic Ignition -- 92A Cayenne) >> WM 244719 Removing And Installing Intake Manifold (Includes Replacing Vacuum Actuator For Intake Manifold Flap Control) [Cayenne S E-Hybrid & Cayenne (3.0)] >> Preliminary Work >> Notes

Preliminary Work: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The procedure for removing and installing the lower part of the intake manifold on the left is described below. The procedure for the other side is practically identical.

  1. Remove compressor. → 211419 REMOVING AND INSTALLING COMPRESSOR
  2. Press vacuum hoses aside.
scientia non olet · About LEMON Manuals