LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (24 - Fuel System - Electronic Ignition -- 92A Cayenne) >> WM 244020 Removing And Installing Fuel Injectors (V6) [Cayenne S, Cayenne (3.0)] >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Read out engine control unit fault memory before getting started and print log.
  2. Switch off the ignition and all loads when working on the fuel system.
  3. Disconnect the battery.
  4. Remove intake-air distributor. → 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR 
  5. Remove fuel collection pipe. → 243019 REMOVING AND INSTALLING FUEL DISTRIBUTOR PIPE