LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (24 - Fuel System - Electronic Ignition -- 92A Cayenne) >> WM 244019 Removing And Installing High-Pressure Fuel Injector (V8) (Cayenne) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Fuel Distributor M8 x 55; tighten fuel distributor evenly from the inside out Tightening Torque 30 Nm (22 ft. lb.)    
Fuel Distributor M8 x 55; tighten fuel distributor evenly from the inside out Torque angle 90°    
Screw Plug   Tightening Torque 22 Nm (16 ft. lb.)    
High-Pressure Line   Tightening Torque 22 Nm (16 ft. lb.)    
Adapter At High-Pressure Pump Tighten high-pressure line prior to connecting Tightening Torque 40 Nm (30 ft. lb.)    
Low-Pressure Line   Tightening Torque 27 Nm (20 ft. lb.)    
Adapter At High-Pressure Pump Tighten high-pressure line prior to connecting Tightening Torque 28 Nm (21 ft. lb.)    
Fastening Screw For High-Pressure Pump M6 x 65 Tightening Torque 10 Nm (7.5 ft. lb.)    
Fuel Pressure Sensor (High Pressure Sensor)   Tightening Torque 22 Nm (16 ft. lb.)    
Connecting Line   Tightening Torque 22 Nm (16 ft. lb.)