Installing Hall Sender
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Check sealing ring on hall sender and replace complete hall sender if sealing ring is defective .
- Make sure not to confuse the electric plug connections for the intake and outlet camshafts .
- Move hall sender into installation position and insert it into the upper timing chain case. Screw in fastening screws hand-tight. Tighten fastening screws. → Tightening Torque: 10 Nm (7.5 ft. lb.)
- Plug in cable plugs on camshaft hall senders.