Installing Hall Sender
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
Tightening Torques, tightening sequence and assembly overviews for the engine and transmission:
- Group 1: → 1X00IN TECHNICAL VALUES
- Group 2: → 2X00IN TECHNICAL VALUES
- Group 3: → 3X00IN TECHNICAL VALUES
Information
The procedure for removing and installing is described for one side as an example. The procedure for the other side is practically identical.
- Carefully install camshaft hall sender.
- 1.1. Clean the sealing face.
- 1.2. Check O-ring and replace it if necessary.
- 1.3. Use new aluminum screw.
- 1.4. Tightening Torque for aluminum screw:
- 1.5. Plug in electric connector and lock it.
The connector must lock with an audible click.