LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (30 - Clutch, Control -- 92A Cayenne) >> WM 307019 Removing And Installing Clutch Actuator (Cayenne S Hybrid) >> Installing Actuator

Installing Actuator

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

For tightening torques, tightening sequence and assembly overview, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS

Information 

Tightening torque, tightening sequence and assembly overview. → 3X00IN TIGHTENING TORQUE, TIGHTENING SEQUENCE AND ASSEMBLY OVERVIEW

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1. Replace O-rings for the pipe/hose connections.
scientia non olet · About LEMON Manuals