LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (13 - Engine - CRANKGEAR, Pistons -- 92A Cayenne) >> WM 138519 Removing And Installing Balance Shaft (Cayenne S Hybrid, Cayenne Tip (3.0), Cayenne Tip & Cayenne Tip (3.0) "Platinum Edition") >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine removed. → 100119 REMOVING AND INSTALLING ENGINE
  2. Engine separated from transmission. → 100127 REMOVING ENGINE FROM TRANSMISSION AND MOUNTING ENGINE ON TRANSMISSION
  3. Remove joint flange on pulley side. → 137419 REMOVING AND INSTALLING SEALING RING FOR VIBRATION BALANCER 
  4. Remove lower timing chain cover. → 153319 REMOVING AND INSTALLING TIMING-CASE COVER
  5. Remove drive chain for auxiliary drives. → 153319 REMOVING AND INSTALLING TIMING-CASE COVER ON V6 DFI ENGINES
scientia non olet · About LEMON Manuals