LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (13 - Engine - CRANKGEAR, Pistons -- 92A Cayenne) >> WM 136319 Removing And Installing Drive Plate For Torque Converter (Cayenne) >> Installing Drive Plate

Installing Drive Plate

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

For Tightening Torques, tightening sequence and assembly overview, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS

Information 

Tightening Torque, tightening sequence and assembly overview. → 3X00IN TIGHTENING TORQUE, TIGHTENING SEQUENCE AND ASSEMBLY OVERVIEW

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1. Use new drive plate screws.
scientia non olet · About LEMON Manuals