Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic Value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting Rod Bolts | M9 x 1 x 50 (always Replace) | Initial Tightening | 30 Nm (22 ft. lb.) | ||
| Connecting Rod Bolts | Torque Angle | 90° | |||
| Cylinder-Head Screws (Internal Serration) | M9 x 1.25 x 141 (7 Ea., Centre) and M9 x 1.25 x 111 (13 Ea., Outer), Always Replace | Initial Tightening | 15 Nm (11 ft. lb.) | ||
| Cylinder-Head Screws (Internal Serration) | Tightening Torque | 30 Nm (22 ft. lb.) | |||
| Cylinder-Head Screws (Internal Serration) | Torque Angle | 180° | |||
| Oval-Head Screw On Timing Chain Housing | M6 x 25 | Tightening Torque | 8 Nm (6 ft. lb.) | ||
| Hexagon-Head Bolts On Oil Pump | M8 x 20 | Tightening Torque | 8 Nm (6 ft. lb.) | ||
| Chain Tensioner | M22 x 1.5 x 18.7 | Tightening Torque | 40 Nm (30 ft. lb.) | ||
| Bearing Pin On Guide Rail For Drive Chain | M8 x 11.5 | Tightening Torque | 10 Nm (7.5 ft. lb.) | ||
| Hexagon-Head Bolt On Drive Wheel For Timing Chain | M10 x 40 (Always Replace) | Initial Tightening | 60 Nm (44 ft. lb.) | ||
| Hexagon-Head Bolt On Drive Wheel For Timing Chain | Torque Angle | 90° | |||
| Bolt For Guide Rail | Tightening Torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening Screw On Guide Rail | Tightening Torque | 20 Nm (15 ft. lb.) | |||
| Hexagon-Head Bolt On Guide Rail | M8 x 45 | Tightening Torque | 23 Nm (17 ft. lb.) | ||
| Hexagon-Head Bolts On Camshaft Controllers | M12 x 1.5 x 85 (Always Replace) | Initial Tightening | 60 Nm (44 ft. lb.) | ||
| Hexagon-Head Bolts On Camshaft Controllers | Torque Angle | 90° | |||
| Hexagon-Head Bolt On Lower Timing-Case Cover | M6 x 16 (20 ea.); M6 x 58 (2 ea.) | Tightening Torque | 10 Nm (7.5 ft. lb.) | ||
| Oval-Head Screw On Vacuum Pump | M6 x 20 | Tightening Torque | 8 Nm (6 ft. lb.) | ||
| Oval-Head Screw On Vacuum Pump | M6 x 40 | Tightening Torque | 8 Nm (6 ft. lb.) | ||
| Hexagon-Head Bolts On Oil Pan | M6 x 20 | Tightening Torque | 12 Nm (9 ft. lb.) | ||
| Fastening Screw On Cylinder Head Cover | With Guide Sleeve | Tightening Torque | 10 Nm (7.5 ft. lb.) | ||
| Fuel Line To Fuel Distributor Pipe | Tightening Torque | 22 Nm (16 ft. lb.) | |||
| Fuel Line At Plenum Panel | Tightening Torque | 35 Nm (26 ft. lb.) | |||
| Cheese Head Bolts On Fuel Distributor Pipe | M8 x 55 (Always Replace) | Initial Tightening | 30 Nm (22 ft. lb.) | ||
| Cheese Head Bolts On Fuel Distributor Pipe | Torque Angle | 90° |