LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (19 - Engine - Cooling -- 92A Cayenne) >> WM 197819 Removing And Installing Coolant Temperature Sensor For Controlling Engine Temperature (Cayenne) >> Installing Coolant Temperature Sensor For Controlling Engine Temperature

Installing Coolant Temperature Sensor For Controlling Engine Temperature

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Coat O-ring with coolant.
  2. Move temperature sensor into installation position and press it into the cylinder head using a suitable tool.
  3. Perform further installation in reverse order, paying attention to the following:

    Tightening Torque for temperature sensor: 5 Nm (3.5 ft. lb.) 

scientia non olet · About LEMON Manuals