LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (19 - Engine - Cooling -- 92A Cayenne) >> WM 194019 Removing And Installing Coolant Reservoir (All Models) >> Installing Coolant Reservoir

Installing Coolant Reservoir

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. The coolant reservoir is installed in reverse order to removal.
  2. Insert the coolant reservoir into the brackets on the floor and tighten fastening screw to → Tightening Torque: 9 Nm (6.5 ft. lb.)  .
scientia non olet · About LEMON Manuals