LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (43 Leveling System, Air Suspension, Damper Control -- 92A Cayenne) >> WM 433419 Removing And Installing Sensor For Body (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing And Installing Rear Body Acceleration Sensor

Removing And Installing Rear Body Acceleration Sensor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

The rear body acceleration sensor (item 7) is integrated into the levelling system/PASM control unit (item 6).

  1. Remove rear side trim panel at the right. → 700319 REMOVING AND INSTALLING SIDE TRIM PANEL FOR REAR LUGGAGE COMPARTMENT
  2. Remove levelling system/PASM control unit. → 431619 REMOVING AND INSTALLING LEVELLING SYSTEM CONTROL UNIT 

    Installation is performed in reverse order.

scientia non olet · About LEMON Manuals