LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (43 Leveling System, Air Suspension, Damper Control -- 92A Cayenne) >> WM 433019 Removing And Installing Front Spring Strut (Air Springs) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work >> Subsequent Work For Removing And Installing Front Spring Strut (Air Springs)

Subsequent Work For Removing And Installing Front Spring Strut (Air Springs)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the drive shaft. → Installing Front Drive Shaft
  2. Fit the relevant side engine compartment trim. → 700219 REMOVING AND INSTALLING FRONT COVER (ENGINE COMPARTMENT)
  3. To fill the air suspension (the system must be filled with compressed air), use the Porsche System Tester. → 4301IN FILLING SPECIFICATION FOR AIR-SPRING STRUT 
  4. Switch on levelling system → Lifting the vehicle  .
scientia non olet · About LEMON Manuals