LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (43 Leveling System, Air Suspension, Damper Control -- 92A Cayenne) >> WM 432537 Disassembling And Assembling Rear Spring Strut (Air Springs) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Information >> Gaskets, Sealing Rings

Gaskets, Sealing Rings

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Always replace sealing rings and bellows.

Always replace and position safety catch. -arrow- 

Fig 1: Locating Hose Sealing Ring
G09935647Courtesy of PORSCHE CARS NORTH AMERICA, INC.

After removing gaskets, examine the contact surfaces on housings for burrs and damage.

Always loosen and tighten screws and nuts crosswise for mounting covers and housings.

Lightly grease sealing rings with Syntheso Glep 1 (Part No. 000.043.204.68).