LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (43 Leveling System, Air Suspension, Damper Control -- 92A Cayenne) >> WM 432519 Removing And Installing Rear Spring Strut (Air Springs) (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preliminary work

Preliminary work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the relevant side panel of the luggage compartment cover. → 700619 REMOVING AND INSTALLING TRIM PANEL FOR LUGGAGE COMPARTMENT (LUGGAGE COMPARTMENT COVER)
  2. Remove wheel → 440519 REMOVING AND INSTALLING WHEEL .
  3. Bleed the spring strut.

    To bleed the levelling system (compressed air must be released from the system), use the Porsche System Tester. To do this, select the Bleed levelling system menu item in the levelling system. → 4301IN BLEEDING AND FILLING THE LEVELLING SYSTEM 

scientia non olet · About LEMON Manuals