LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (43 Leveling System, Air Suspension, Damper Control -- 92A Cayenne) >> WM 431955 Replacing Rear Level Sensor (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Calibrating Rear Level Sensor

Calibrating Rear Level Sensor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Porsche System Tester to the vehicle and start the System Tester. Switch on ignition.
  2. Select the relevant vehicle type using the cursor keys.
  3. Select "Levelling system" using the cursor keys.
  4. Select the "Adaptation" menu and run the Calibration function.
  5. Read out fault memory and correct any faults that are present, then erase fault memory.
scientia non olet · About LEMON Manuals