Subsequent Work (For Front-Axle Valve Block)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Fit front wheel housing liner at the right. → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER
- Fit the front right wheel. → 440519 REMOVING AND INSTALLING WHEEL
- Bleed the system. → 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
- Check the hydraulic fluid level and top up if necessary. → 430501 CHECKING FLUID LEVEL (PDCC)
- Start the PDCC system.
To do this, connect the Porsche System Tester and proceed as follows:
- Select PDCC control unit.
- Select the "Maintenance/repairs" menu.
- Select "PDCC start-up".
The system start-up is performed automatically. In other words: system activation and calibration as well as testing runs automatically.