LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (43 Leveling System, Air Suspension, Damper Control -- 92A Cayenne) >> WM 430419 Removing And Installing Valve Block (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing Front-Axle Valve Block

Installing Front-Axle Valve Block

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order.

    Observe specified tightening torques:

    Front valve block to wheel housing: Tightening torque 10 Nm (7.5 ftlb.) 

    Line to front valve block: Tightening torque 28 Nm (21 ftlb.) 

scientia non olet · About LEMON Manuals